Underground Tank Removal Archives | Oil Tank Removal Guidelines and Resources for NJ
No Banner Found, please go to admin panel to upload banner image for this area

Archive for the ‘Underground Tank Removal ’ Category

Underground Oil Tank Removal: A Benefit for NJ Home Owners

Posted on: April 5th, 2013 by Frank McGuire
0

oil tank removal companies nj get PermitsUnderground Oil Tank

Oil tank removal and replacement is a very beneficial project for all homeowners. The oil tank is responsible for heating the home and the water that is in the house. As the oil tank wears out it may not perform as well as it once did and the need for a replacement will become more apparent. Most homeowners cringe at the idea of having to replace their oil tank for three different reasons.

The first reason is because they fear it will damage their home. This is not the case at all; any well-established oil tank removal company like Core Environmental Services will be able to replace the tank with minimal affects upon the house. The second reason is most homeowners think they may have to go without hot water or heat for a long period of time. Once again this assumption is incorrect. The average time it takes for an oil tank to be removed is around four to five days. During this time a conversion can be done on the first day. The final concern of most homeowners is the length of time it takes to install the new oil tank. Most homeowners assume it takes weeks, but the truth is it usually takes a couple of days for the entire project to be finished from preparation to conversion.
The first step to removing your oil tank is tank locating the existing oil tank. Some homeowners are aware of the location of their home’s oiloil tank locating NJ tank while others are not. For those that do not know where their oil tanks are located, you should hire an oil tank company to come out and do a Tank Sweep for it like us. During this inspection the removal team will inform you of the status of the existing oil tank. Some oil tanks may be damaged or be leaking, which can lead to various problems for your home. During the inspection the inspector will let you know what type of equipment will be needed to remove the old tank from your home.

Depending on where the tank is located, determines what type of equipment is safe to use in its extraction. The tank may be able to be dug out with a back hoe or by hand depending on how tight the surroundings of the tank are. In most cases hand digging takes more time and is more costly than using a back hoe. Finally a permit will be needed by the town before any oil tank removal can be completed. On average a town may charge anywhere from seventy dollars to two hundred dollars for a permit. The cost of the permit depends on the town the house is in. Some towns require notification of the local utility companies, so that proper steps can be taken to protect sewer and power lines.

underground Oil Tank Removal NJRemoving an existing underground oil tank from your house does not have to be a huge ordeal. By following a few steps and being informed the extraction and replacement of the oil tanks should be effortless. Give us a call today and we would be happy to come out and do a no cost site inspection for you.

Call us at: 973-500-5800

 

Topic: Underground Oil Tank

Tags:.

How much does oil tank removal cost in NJ?

Posted on: April 5th, 2013 by Frank McGuire
0

Oil tank removal costs NJ

Oil Tank Removal Cost NJ

Personally, I think the oil tank removal costs in New Jersey may go lower instead of higher considering the fact that the New Jersey oil tank removal rebate program is currently suspended and ran out funding. So, how much is the cost for removing oil tank in New Jersey? Well, calculating the cost of removing oil tank in your residential will depend on several factors. First, the size of the tank, the bigger tank will require bigger budget to remove the oil and small tank will cost you less. However, the size is not the main and the only aspect to consider when we talk about the oil tank removal costs. The second factor and probably the most important one that affects the cost of removing oil is the type of the tank. This means the underground storage tank usually costs more money to remove the oil than that of the above ground storage tank. This is because the underground storage tank requires more complicated ability to access it than the above ground one. So, if the cost is more expensive than the above ground storage tank, I think it makes sense. Unfortunately, many people like the underground storage tank better than the above ground one because it is safer since it is buried on the ground. However, knowing the fact that the cost is more expensive than the above ground storage tank, I think they need to think twice before making the decision to choose between the two.

The next factor that determines the oil tank removal cost in NJ is the condition of the tank. The old tank will definitely require moreoil tank removal cost NJ services and more skills from those who remove it and in the end; this will result in more expensive cost of removing it. Well, any storage tank, regardless that it is under ground or above the ground, will certainly decrease in its value and function over the course of the years. These will lead to a condition in which the tank is old enough to cost the homeowners a lot of cash just to maintain it, including removing the oil from it. From this point of view, any storage tank that has been through many years of lifespan can really cost the owner a lot of cash to maintain it. So, how much do the oil tank removal costs in NJ, anyway? Considering the factors that can affect the calculation, it is best for New Jersey residents to call the professional oil removal companies to make the calculation for them. This is because unless someone knows exactly the condition and what is required, then the exact price is still unable to be decided. Although the oil tank removal costs maybe expensive, but removing oil properly is very important not only for your residence, but also for your environment. Knowing this fact, I think it is better and wiser to leave this skillful task of removing oil from the storage tank to those professionals from reputable oil removal companies in NJ so that you can be sure of getting a quick, safe and satisfying result. After all, the experiences and tool sets from these guys will only benefit you as the homeowners.

 

Topic: oil tank removal cost NJ

Cost to Remove Underground Oil Tank In NJ Permit Process

Posted on: March 9th, 2013 by Frank McGuire
0
Cost to Remove Underground Oil Tank In NJ Permit Process

Call before you dig…

 

Cost to Remove Underground Oil Tank In NJ Permit Process

If you are planning an oil tank removal in the state of New Jersey then you will need to have a permit.  This is something that is required and you will not be able to have the oil tank removed without a permit.  However, it is important to know that there are requirements for these permits that must be met.  You will want to continue reading to learn what some of these are.  Your oil tank removal will not take place without meeting these permit requirements.

First off, the tank size and shape should be installed and removed as one piece.  If you are working with a contractor they should know that as well.  Shut off valves should also be on the tank and the appliance so that they can be accessed before removal.  Many times the contractor that you have decided to work with will be obtaining the permits for you.  They have experience doing this and they will often include it in the estimate that they give you.

Now, if you are thinking about obtaining the permit on your own you will want to make sure that you are contacting the environmental office in your local municipality.  They will be able to give you the paperwork that you need.  They can also help answer any questions that you might have.  Many times you will see that you are going to be expected to pay anywhere between $50 and $200.

The oil tank removal should only take a few hours once everything has been set up and is ready to go.  You generally do not have to worry about any disruptions in any of your service while this is taking place either.  This is good if you are using the oil for your heat or your hot water.

Cost to Remove Underground Oil Tank In NJ Permit Process

Now, there is something very important that you need to keep in mind when it comes to the oil tank removal and permit application process in New Jersey.  When all of this information is submitted, no matter who submits it, the building department is going to have up to 20 days to sign off on the permit.  Therefore, you may not be able to get things started as quickly as you have had planned.  You may want to speak with your contractor to see if they are able to move the process along any faster.  You can also find out how long they generally wait for approval so you will have a better idea of what to expect.  Most of the time it will only take approximately ten days to get the approval that you are looking for, and that is at the most.  But, it will depend on where you are located.

Once you have your permit your contractor may also need to call in utility companies to move other lines and pipes.  While this may be an inconvenience to you, it is safer in the end.  If you are able to identify issues like this before you apply for your permit you can have these issues taken care of before the permit is approved.

 

Topic: Cost to Remove Underground Oil Tank In NJ Permit Process

Tags:.

ROTH Tank Certified Installers in NJ

Posted on: March 7th, 2013 by Frank McGuire
0

ROTH Tank Certified Installers in NJ

 New Jersey Oil Tank RemovalWhat sets ROTH Tanks apart from the competition is their double walled oil tank design that is guaranteed to prevent oil leaks that contaminate your soil and groundwater.  But that isn’t the only thing to consider when deciding to install or remove your oil tank.  You can find ROTH Tank certified installers in New Jersey who will guarantee compliance with federal, state and local regulations and will ensure that your oil tank installation or oil tank removal is done right.

There are other oil tank companies in New Jersey that can do oil tank installations and removals, but none come more highly recommended than ROTH Tank certified installers.  ROTH Tanks lead the industry because of their patented designed tanks that provide the most protection against leaks.  That is because the inside tank is made of the same corrosion resistant plastic as your car’s gas can.  That tank is wrapped inside of a tank made of galvanized steel.

ROTH Tanks can be installed above ground outside or can be installed indoors, typically in your basement.  ROTH oil tanks are only installed by authorized, certified ROTH tank installers.  Each installer is OSHA certified for the highest standard of compliance for home oil tank installations and oil tank removals.

Many homeowners are switching their old oil tanks for cleaner alternatives like natural gas or electric.  But if you are going to stick with oil, ROTH gives its customers a thirty year limited warranty against defects and manufacturer error.  That’s added security over the life of your oil tank.  Their tanks are resistant to corrosion which helps to prevent any oil leaks.  Each tank comes with a leak alert that warns you if your inner or outer tank is leaking.   Even with all of the environmental protections that have gone into the design of the ROTH Oil Tank, if your tank does leak, the outer wall of the tank can hold more than 110% of the oil that is contained inside of the inner tank.

Experience is a teacher, and ROTH has been manufacturing oil tanks in the U.S. for over forty years.  Their warranty goes above and beyond the industry standard by twenty years.  If there is a leak in the thirty years that your ROTH Tank is installed, you are insured for up to $2 million for costs associated with cleaning and repairing the leak.

There are numerous companies in the State of New Jersey that are certified to install your ROTH Tank.  Finding the right company for your oil tank installation or removal is important.  Granby is another oil tank company that many oil tank installers will offer to its clients.  But those tanks lack the double wall design that puts ROTH Tanks ahead of its competition.  Make sure that your installers are certified.  Ask questions about their knowledge of federal, state and local regulations for the size and number of tanks you are installing and if your town allows for above ground tanks.

Tags:.

Why Install a ROTH EcoDWT?

Posted on: March 7th, 2013 by Frank McGuire
1

New Jersey Oil Tank RemovalAt Core Environmental Services, LLC we strive to provide our customers with top quality service and top quality products. In doing so we highly recommend the replacement of any underground storage tank (UST) and or aboveground storage tank (AST) used for the storage heating oil for your home to be replaced with a ROTH EcoDWT.

ROTH tanks utilize double-wall construction for ultimate safety and reliability. In addition ROTH tanks are made in the USA and provide the following benefits over the “old fashion” single-wall steel tanks:

• 30 Year limited Product Warranty
• $2 Million Leak Coverage
• Qualifies for Bio Fuel Storage
• Leak Sensor Protected, Double Wall Security

ROTH tanks do more for the Environment by avoiding spills and leaks caused by defective pipes, couplings, or fittings which are sometimes located under the steel type tanks installed by others.

ROTH tanks do more for your Safety by being completely rust-free, inside and out. This minimizes the potential dangers and disasters of oil spills and leaks caused by corrosion.

ROTH tanks give you more Quality by being able to forget about the problems of oil odors and the dangers of oil leaks.

ROTH tanks have been installed in more than 3 million homes since 1971 and ROTH tanks last longer than ever before due to the outstanding quality and unbeatable guarantee. No more purchasing a new tank every 10 years like the “old fashion” single-wall steel tank models.

Installation of a ROTH tank is faster and easier than ever plus:

• Up to 50% lighter than steel tank equivalents.
• Compact & economical design which takes up a smaller foot print (8 sqft. for 275-gallon / 1000L model)
• Unique expansion system ensures increased storage capacity & faster, easier fill ups.
• Every tank is completely sealed, pressure tested, & meets exacting quality control standards.

Summary of benefits for a ROTH tank purchase and installation:

• Weld-free galvanized steel outer tank capable of holding 110% of the inner tank.
• Seamless high-density polyethylene inner tank.
• Highly visible optical leak alarm.
• 50% lighter than a 12-gauge steel tank with a larger storage capacity.
• Corrosion resistant steel filling system & external 2” thread, allowing for an even level in each tank when installed in tandem or groups.
• Burner feeding system consisting of a duplex bushing built to be installed directly into the ROTH tank’s opening on the top of the tank. NO BOTTOM FEED.
• Factory designed and available roof/rain shield can be installed for outside use. Allowing for added protection of the fill, vent, & supply piping from the weather.
• Double-wall construction allows the air space between the inner & outer walls to act as an insulator against cold temperatures to minimize the chance of the oil “gelling” like what occurs in steel tanks.

Installation options for the ROTH tank:

• Available in five (5) sizes for residential heating oil tank storage. The sizes range from 110 to 165 to 275 to 400 gallons.
• The 275-gallon model comes in both standard height (1000L) and low-height (1000LH).
• All models of the same size can be connected together with ROTH designed cross-over kits for side by side or end to end configurations.
• Tanks can be installed inside basements, outside, and or inside a garage with protective barrier(s) if required by code. *

* – Refer to illustrated site photographs of these typical installation locations at some customer’s homes under Tank Installation Services tab on the home page.

Tags:.